beads – Page 2 – A Smith of All Trades

Gunmetal and mint necklace

April 2, 2013April 2, 2013 Jessica Smith

How was everyone’s Easter? My weekend was filled with three different dinners, a birthday brunch and simply way too much delicious food. Basically, it was awesome. My older sister came into town, and it was the first Easter and birthday we’ve celebrated with her in a decade (or so it seems). My mom, little sister and I took her to brunch in Baltimore at Cafe Hon to celebrate her birthday. It was a ton of fun.

Sunday was dinner at my dad’s house with my stepmom’s family and her brother’s partner’s family. I’ll give you a second to figure out that relationship 🙂 We only get to see them at Easter, which makes the holiday even more enjoyable.

My Easter craft was pretty simple, and I’m only just sharing it now because the weekend was SO busy and yesterday I had a killer headache. I even missed trivia, so you know it was crummy.

Anywho… I needed a new necklace for Easter. Yes, needed.

I had this old chain that I’d been hanging onto. I liked its chunkiness, but the length was awkward. You know what I mean…. long enough to occasionally disappear under your shirt and just the right length to get stuck in cleavage… basically, the worst length for a necklace!

I cut the necklace in half using really strong pliers, then added a new section to the necklace of bright mint beads.

The beads were a gift from my bestie, and were a totally sweet thrift store find. To add them to the chain, I used beading wire and a crimp bead. I looped one end of wire around the end of the chain, then flattened and crimped the crimp bead so no beads would fall off.

Then, I strung the beads with gunmetal spacers in between, closing the wire at the other end with a crimp bead.

In about four minutes, my boring, awkward-lengthed necklace was transformed into the perfect necklace. My sister really liked the whole thing hanging asymmetrically, too.

AND, it is also the perfect length to wrap around my wrist to become a chunky bracelet. #Winning.

I hope you all had a great Easter. The weather is finally getting warmer in Maryland, so hopefully I can start to tackle a few larger projects I’ve been wanting to do.

Oh, and our doors are supposedly in! Joyyyyyyyy 🙂 I’ll make sure to show you when they are all installed and beautiful!

Craft Projects, Jewelry

Geometric necklace

March 17, 2013March 28, 2013 Jessica Smith

Update: I pretty much wear this necklace every day. I love it.

Ever have a project that starts out one way and ends completely differently? I wanted to make a pair of earrings that were inspired by something I saw on Pinterest a week or so ago, so I pulled out my beads and supplies and started fiddling with the beads. The further I got into my project, the more I wanted to create a necklace. I started with one color of bead and a small geometric shape, and I ended up with two tones of gunmetal and a wider pendant.

Onto the tutorial.

{A Smith of All Trades} Geometric Necklace

I started this project with one long eye pin, and 11 head pins (eye pins hav a loop at the end so you can connect them to other things; head pins have a flat or round end meant to stop beads from falling off).

{A Smith of All Trades} Geometric Necklace

On each head pin, I placed a specific number of beads. The number was important because it would help make my geometric shape later on. Here’s the pattern I ended up using (it’s not what I started with). 3: silver, 5: gunmetal, 6: gunmetal, 7: gunmetal, 8: gunmetal, 10: silver, 8: gunmetal, 7: gunmetal, 6: gunmetal, 5: gunmetal, 3: silver.

When each head pin had the correct number of beads on it, I twisted the end into a loop to stop beads from falling off the open end.

{A Smith of All Trades} Geometric Necklace

Next, I grabbed my eye pin and started threading the head pins on the order I specified earlier. In between each head pin, I place one gunmetal bead.

One the entire eye pin was threaded with head pins, I closed the other end using round-nosed pliers.

Time to add the chain. At first, I added a long chain so this would hang low in my chest. I later went back and added a clasp so it would hit above my chest (I told you I changed my plans a ton!).

To add the chain, I simply cut the amount I wanted, then opened each end of the eye pin and placed a link in the wire. For the clasp, you can attach it in the same way using a jump ring.

I really like this necklace a lot. Now that I have a good pattern to follow, I think I’ll try to make it again in funkier colors.

Happy St. Patrick’s Day!!

Christmas, Craft Projects, Holiday

Christmas Tree craft

January 2, 2013 Jessica Smith

I got the best Christmas present ever when my dad called me on Dec. 23 to ask if I wanted to do a Christmas craft on Christmas Eve morning before all of our festivities began. I said yes (duh) and dad went out hunting for supplies. When he was younger, his mom made Christmas trees out of mixed nuts that she decorated and hung on a wall in their home. He wanted to make one just like it for his home and for mine.

For this project we used:

Thin sheets of wood
Hot glue
Nuts in their shells (three or four bags)
Pinecones
Metallic spray paint
Small ornaments
Fabric
Batting
Drill
Jigsaw
Wire
Felt

Step 1: Bake pinecones to kill any critters that may be living inside. Bake for 25 minutes at 200 degrees. That should do the trick. We gathered ours outside of our gym at 6:30 a.m. … in the dark. I’m sure we looked wayyy creepy.

Step 2: Sketch out a tree shape onto a piece of wood. We drew a triangle for the tree, a small rectangle for the stump and a trapezoid for the base.

Step 3: Cut out your tree using a jigsaw (or a hand saw if you prefer).

Step 4: If you want to make more than one, use your cutout tree as a stencil and trace it onto the first sheet of wood.

Step 5: Drill a hole in the top of the tree and string wire through to make it easy to hang later on.

Step 6: Start gluing on your nuts and pinecones. I used a pine cone for the top of my tree. Dad used a prickly seed from a sweet gum tree as his topper.

It is OK to have gaps in your nuts and pine cones because you’ll be filling it in with ornaments later on.

Step 7: Spray paint the top of the tree using a metallic spray paint of your choice. Dad went with a bronze metallic.

I chose a metallic silver for mine.

Step 8: Once your tree is painted, it is time to create the trunk. I clipped edged of pinecones and glued them onto the trunk.

Dad went with thin twigs. If you’d like your trunk to be the same color as your tree, do this step right after gluing on your nuts.

Step 9: Glue your ornaments onto the tree.

Step 10: Cover the base of the tree in batting. Then, cover with fabric. Our wood wasn’t thick enough for staples, so we hot glued all of our fabric and batting directly to the wood.

Step 11: If you see the need, which we did, glue felt to the back of your tree (small circles will do) to spots of the tree that might rub against the door or wall you will hang it on. You don’t want to scuff your walls, and small circles of felt in the corners and around the wire will help.

Step 12: You are done! Hang your tree up for the holiday season and admire.

This was definitely best part of my holiday break, which is saying a lot because I had an amazing holiday break. I loved doing such a fun and sentimental project with my dad. We have one more base for next year. Dad’s got grand plans for how to make our next trees even better.

meanddad

Thanks for the great idea, Dad 🙂 Love you.

One last thing…. happy birthday to my awesome mother-in-law, Robin!

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this: