ribbon – A Smith of All Trades

I found a bunch of unused ribbon when cleaning my craft room a few weeks ago and decided to put it to use by turning it into a whimsical dreamcatcher.

For this project I needed:

1 small embroidery hoop
Lots of ribbon
Tape
Embellishments
Thread

Steps:

First, separate your embroidery hoop. You only need the inner circle.
Take ribbon and wrap the embroidery hoop. Secure the ends with tape or glue. Mine didn’t meet up, but it didn’t matter.
Create a hanger for the dreamcatcher by knotting a piece of ribbon in the empty area or where your ends meet. Wrap that ribbon around to cover the tape/glue used to secure the other ribbon. Knot to secure the hanger and tuck and excess ribbon and the knot underneath ribbon wrapped around the hoop.
Hang your colorful ribbon in random lengths along the bottom of your dreamcatcher, opposite the hanger. Depending on the style of ribbon, I either knotted the ribbon to keep it secure, or simply looped it through itself to keep it attached. (Tip: The thick, wavy ribbon was really hard to knot, so I looped this to secure. Thinner strands knotted and likely would’ve fallen off over time. I basically judged by the style of ribbon.)

I wanted more color and more volume, so I ran to Michael’s to grab a few more spools of ribbon.
Add any embellishments you want! I made a felt flower for mine. You can see a tutorial for that here. To secure it to the dreamcatcher I simply stitched it through a few strands of the ribbon I’d wrapped around the hoop.
Hang and enjoy!

It’s not a real dream catcher because I didn’t add strands of ribbon through the middle of the hoop to catch dreams, but it’s so charming nonetheless.

Pro tip: Ribbon is shockingly expensive. I had a bunch in my craft room, and for the extras I hit up the ribbon dollar bin at JoAnne’s (pre-project) and the $0.50 ribbon section at Michael’s (mid-project). Overall, this cost me $3.50 for the extra ribbon and $1.17 for felt — I had the rest of the supplies on hand. It’s even cuter since it cost under $5!

DIY GIFT GUIDE, Gift Idea

Bridal Shower Gift: Kitchen Towel Cake

October 30, 2015October 30, 2015 Jessica Smith

Kitchen-Towel-Cake_Final2

While pinning the heck out of some awesome fall bridal shower ideas I stumbled across a cute idea to do a version of a Diaper Cake with kitchen towels and other utensil. If you want to see the original, here was my inspiration.

I went to Home Goods, Target and Amazon for my supplies:

Normal dish towels
Microfiber dish towels
Scrubby dish towels
An apron
Cloth napkins
A pie plate
An oven mitt
Wooden spoons
Measuring spoons

I bought what I thought I needed, returned the extra sets I didn’t use, and gifted Dana a bag for the odds and ends that didn’t work. Depending on the size you’d like your cake to be or the size of your pie plate (which the cake sits in), you’ll need varying amounts of each.

I started on the bottom layer and wrapped up the largest, “normal” towels. Then, I tied them together with some twine. When that was secure, I folded the apron, which had beautiful fall colors throughout, and wrapped that around the towels to beef up the bottom layer. I knew I wanted the oven mitts on the bottom layer, so I took twine and tied it around the apron and the oven mitts to keep the entire bottom layer together. Then, I broke a plastic hanger and stuck it in the middle so the remaining two layers would have support when I needed to move the cake around.

Kitchen-Towel-Cake_step-1

I probably should have added more towels to the bottom layer since there was such a gap between the edge of the pie plate and the bottom, but the cake was already so full of towels. I ran back out to Home Goods and picked up a set of burnt orange cloth napkins, rolled them up and stuck then around the base of the cake.

Kitchen-Towel-Cake_step-2

For the second and third layers, I went through the same process. Choose towels, roll towels, secure with twine. I stuck each layer onto the hanger to make sure the sizing was appropriate. Then, I took the top layer off and added the wooden spoons into the second tier of the cake. I simply stuck them into the folds of towels, then angled and shoved until they were secure and looked right. I did the same thing for the measuring spoons, too.

kitchen-towel-cake_step-3

Once I was satisfied with layer 2, I added the top layer. I did redo the layers three or four times until I thought they looked right, so don’t get discouraged if your towels don’t look amazing on the first go around.

Kitchen-towel-cake_step-4

Pretty cute, huh? All I needed was ribbon to cover the twine and the cake toppers 🙂

For cake toppers, I ordered this adorable set of pumpkin salt and pepper shakers from Amazon. They barely fit on the top of the cake, so I was glad I went with this set instead of other sets that had two of the stumpier pumpkins. To make sure they didn’t fall off, I removed the stoppers (put them in a baggie or you’ll lose them!) and stuck each shaker on a skewer I’d shoved into a fold of the top tier.

Kitchen-Towel-Cake_top

I love love love this as a gift for a shower — especially for a bride who is a baker-chocolatier-chef extraordinaire like Dana is. It was a lot of fun to make.

Kitchen-Towel-Cake_final

It certainly is charming, isn’t it?

What clever gifts have you made for a bride-to-be? There are so many cute ideas out there!

Christmas, Craft Projects, DIY GIFT GUIDE, Gift Idea, Holiday, Pallet Projects, Quick and Easy Crafts

Wood Burning and Wooden Ornaments

January 8, 2015January 2, 2015 Jessica Smith

My last holiday craft involving pallet wood also involved a new skill — wood burning!! I’d never successfully tried wood burning before, but I figured out what I’d been doing wrong and had a blast playing around with the new technique.

Before I got into the wood burning, I simply was making trees from the pallet wood. The first I made was a gift for my secret santa at work:

I cut out the tree using my jigsaw, sanded it down, added a hole for the ribbon and colored the wood using the restor-a-finish product I always rave about. Cute, yes? My coworker loved it. I also gave him a Home Depot gift card — he and I love to chat about our ongoing projects. He’s my Home Depot buddy!

I made a similar tree for my godmother, but to girl it up a bit I painted gold dots all over it to look like ornaments.

Then I moved on to some simple wood burned ornaments. I tried it out on some scrap wood first:

After doing some research online, I learned that you can use a soldering iron as a wood burning tool. The only downside is the lack of interchangeable tips. I’d tried this before, but it turns out I didn’t let my iron get hot enough. This time I let it fully warm up — and that did the trick.

Once I’d tested it out on a few pieces of scrap wood, I started to make gifts for people. An “E” for the neighbors, an “S” for my mother-in-law and an “M” and “E” for Max and Eli, my friend’s sons.

Let me back track for a sec — all of these are from scrap wood, which I liked a lot because pretty much none of my pallet went to waste. I sanded everything down before burning it.

OK, back to the burning… once I got designs I liked, I added holes for ribbon or wire. Some I stained, some I left natural.

My buddy Maz really liked his little “M.” OK, he obviously couldn’t care less about it… I just wanted to share our selfie 🙂

The letters I did were fairly easy (Minus the “S”) because they were all straight lines. Since my soldering iron was a longer flat tip, that was the only shape I could do. Lots of dashes, exes and straight lines.

I got the idea to use those shapes to make wood-burned Christmas tree ornaments. These were my favorite.

If you smell them, they smell like campfire! LOVE.

I gave my sister and her BF the larger ornament with the star. The other I selfishly kept for us. I added a lumberjack-esque ribbon to it, too.

How adorable is that? It it cost me $0! The wood was scrap, the wire I add and the ribbon came off of a gift 🙂

I love to make Christmas gifts and I think these were some of my favorites that I made this year.

Tag: ribbon

Whimsical (Faux) Dreamcatcher

Bridal Shower Gift: Kitchen Towel Cake

Wood Burning and Wooden Ornaments

Rate this:

Share this:

Like this:

Rate this:

Share this:

Like this:

Rate this:

Share this:

Like this: