Craft Projects – Page 4 – A Smith of All Trades

Teal Ruffled Shirt

March 23, 2015March 22, 2015 Jessica Smith

We all have old clothing that we no longer wear or should no longer wear because they are old and beat up. But for some reason, it’s so hard to get rid of your favorites, no matter how rough shape they are in.

My white ruffled T-shirt is from Target and I love it. I have it in navy, too. The navy shirt has held up great, but I cannot say the same for the white. Although it’s hard to see in the photo, the shirt had seen better days. Plus, I’m just messy. Messy Jessie. A lot of the ruffles had dirt on them that I just couldn’t get out.

Instead of tossing the tee, I bought some Rit dye off of Amazon and changed the whole look it.

It’s important to follow the instructions on the dye bottle. I opted to dye my shirt in a bucket, not my machine. I didn’t want to deal with the cleanup of my washing machine after the fact and I have a million large buckets.

I wet my shirt and mixed the dye in the bucket per the instructions (half the bottle w/ 3 gallons of hot water).

Then, I added the shirt to the dye and let it soak it in for about an hour. The bottle suggests keeping it moving the entire time. This was the one instruction I didn’t follow.

When the shirt was finished soaking in the dye, I rinsed it out until the water ran clean.

Then, I threw it in the wash, all by itself. Don’t wash your newly dyed fabric with other clothing because it will run and turn your other clothing colors, too.

After the washer, I threw the tee in the dryer. And then I tried it on!

Voila! In about 2 hours, my shirt was brand new. You can’t see any of the old stains and it brightened up the shirt. You can also see that every third ruffle is a little darker. I hadn’t really noticed before, but there are two different materials in the ruffles. Fun!

Too cute! I like how it matches my phone, too.

So next time you don’t want to throw away an old shirt, think about using Rit dye to change the whole look.

Craft Projects, Pallet Projects

“Love” pallet signs

January 15, 2015January 11, 2015 Jessica Smith

My girlfriends and I had a craft night last weekend and made small pallet signs.

Here’s the gist of how I made the signs (I had to make 3 in half an hour, so no pictures):

Cut the wood off of the pallet using a reciprocating saw
Line up the wood you want to use as the front of the sign face down, then place two pieces of wood perpendicular as the back supports
Screw or nail in the supports
Using a circular saw, trim the edges of the signs so they are straight
Sand down the sign
Add picture hanging hardware to the back

I’ve made pallet signs before, so if you’d like more detailed steps on how I constructed the actual sign, check out this post.

The only difference was my nail gun wasn’t working, so I screwed in the back supports instead of nailing them in.

Carrie found an adorable “Love” sign on Pinterest that we decided to do our own take on. We painted the signs using mint and metallic gold paint. The gold paint didn’t show up well on the pallet, so we covered the whole sign in stain to help the paint pop.

Here’s what we came up with:

Carrie’s Sign:

Amy’s sign (she wrote “my heart” in Gaelic):

And my sign:

They are so stinkin’ cute! I’m not sure where I’ll put mine yet — I was thinking in our bedroom, but it isn’t that big so I don’t know if it will look right on any of our walls. I’m also toying with adding it to a gallery wall I’ve been working on for months. I suck at putting gallery walls together and never seem to get them quite right. Plus, I always seem to hang the same photos over and over. So I want to rework the gallery with art in it, so this might fit in nicely.

Since I know I want to hang it up, I added picture wire to the back. I also added soft gel pads so it doesn’t muff up my walls.

Another successful craft night! Do you ever craft with friends? What sorts of things do you make? We are always looking for fun ideas.

Christmas, Craft Projects, DIY GIFT GUIDE, Gift Idea, Holiday, Pallet Projects, Quick and Easy Crafts

Wood Burning and Wooden Ornaments

January 8, 2015January 2, 2015 Jessica Smith

My last holiday craft involving pallet wood also involved a new skill — wood burning!! I’d never successfully tried wood burning before, but I figured out what I’d been doing wrong and had a blast playing around with the new technique.

Before I got into the wood burning, I simply was making trees from the pallet wood. The first I made was a gift for my secret santa at work:

I cut out the tree using my jigsaw, sanded it down, added a hole for the ribbon and colored the wood using the restor-a-finish product I always rave about. Cute, yes? My coworker loved it. I also gave him a Home Depot gift card — he and I love to chat about our ongoing projects. He’s my Home Depot buddy!

I made a similar tree for my godmother, but to girl it up a bit I painted gold dots all over it to look like ornaments.

Then I moved on to some simple wood burned ornaments. I tried it out on some scrap wood first:

After doing some research online, I learned that you can use a soldering iron as a wood burning tool. The only downside is the lack of interchangeable tips. I’d tried this before, but it turns out I didn’t let my iron get hot enough. This time I let it fully warm up — and that did the trick.

Once I’d tested it out on a few pieces of scrap wood, I started to make gifts for people. An “E” for the neighbors, an “S” for my mother-in-law and an “M” and “E” for Max and Eli, my friend’s sons.

Let me back track for a sec — all of these are from scrap wood, which I liked a lot because pretty much none of my pallet went to waste. I sanded everything down before burning it.

OK, back to the burning… once I got designs I liked, I added holes for ribbon or wire. Some I stained, some I left natural.

My buddy Maz really liked his little “M.” OK, he obviously couldn’t care less about it… I just wanted to share our selfie 🙂

The letters I did were fairly easy (Minus the “S”) because they were all straight lines. Since my soldering iron was a longer flat tip, that was the only shape I could do. Lots of dashes, exes and straight lines.

I got the idea to use those shapes to make wood-burned Christmas tree ornaments. These were my favorite.

If you smell them, they smell like campfire! LOVE.

I gave my sister and her BF the larger ornament with the star. The other I selfishly kept for us. I added a lumberjack-esque ribbon to it, too.

How adorable is that? It it cost me $0! The wood was scrap, the wire I add and the ribbon came off of a gift 🙂

I love to make Christmas gifts and I think these were some of my favorites that I made this year.

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this: