Christmas, Craft Projects, DIY GIFT GUIDE, Gift Idea, Holiday, Pallet Projects, Quick and Easy Crafts

Wood Burning and Wooden Ornaments

My last holiday craft involving pallet wood also involved a new skill — wood burning!! I’d never successfully tried wood burning before, but I figured out what I’d been doing wrong and had a blast playing around with the new technique.

Before I got into the wood burning, I simply was making trees from the pallet wood. The first I made was a gift for my secret santa at work:

PalletTreeOrnament

I cut out the tree using my jigsaw, sanded it down, added a hole for the ribbon and colored the wood using the restor-a-finish product I always rave about. Cute, yes? My coworker loved it. I also gave him a Home Depot gift card — he and I love to chat about our ongoing projects. He’s my Home Depot buddy!

I made a similar tree for my godmother, but to girl it up a bit I painted gold dots all over it to look like ornaments.

Then I moved on to some simple wood burned ornaments. I tried it out on some scrap wood first:

Scrap Burning

After doing some research online, I learned that you can use a soldering iron as a wood burning tool. The only downside is the lack of interchangeable tips. I’d tried this before, but it turns out I didn’t let my iron get hot enough. This time I let it fully warm up — and that did the trick.

Once I’d tested it out on a few pieces of scrap wood, I started to make gifts for people. An “E” for the neighbors, an “S” for my mother-in-law and an “M” and “E” for Max and Eli, my friend’s sons.

Wood Burned LEtters

Let me back track for a sec — all of these are from scrap wood, which I liked a lot because pretty much none of my pallet went to waste. I sanded everything down before burning it.

OK, back to the burning… once I got designs I liked, I added holes for ribbon or wire. Some I stained, some I left natural.

MEandMax

My buddy Maz really liked his little “M.” OK, he obviously couldn’t care less about it… I just wanted to share our selfie 🙂

The letters I did were fairly easy (Minus the “S”) because they were all straight lines. Since my soldering iron was a longer flat tip, that was the only shape I could do. Lots of dashes, exes and straight lines.

I got the idea to use those shapes to make wood-burned Christmas tree ornaments. These were my favorite.

Small Tree

Large Tree

If you smell them, they smell like campfire! LOVE.

I gave my sister and her BF the larger ornament with the star. The other I selfishly kept for us. I added a lumberjack-esque ribbon to it, too.

Tree_Ribbon_Final

How adorable is that? It it cost me $0! The wood was scrap, the wire I add and the ribbon came off of a gift 🙂

Tree_Ribbon_On Tree

I love to make Christmas gifts and I think these were some of my favorites that I made this year.

Advertisements
Furniture

Console Table Magic

It’s been a couple of weeks since I’ve posted on the blog and I’m happy to share that my tomato tally has crossed the 100 tomato threshold! Yes, this weekend we hit a Tomato Tally of 102. I probably have a dozen more needing to get picked, too. Craziness.

Anyway, this isn’t actually a post about tomatoes. Shocker, I know.

Ever since we rearranged our living room to accommodate my slipper chairs, I’ve wanted to get a console table for our living room.

Slipper chairs

The room is starting to really come together. New chairs, new pillows… and now, new table!

Console before

I found this console table on Craigslist for $25 and an office building 4 minutes from my house. I emailed and was super pleased to hear that I was the first person to reach out and the table was mine if I was interested.

I left work in a hurry to make it to the office complex before they closed at 5, bargained them down to $20 and left with a new table!

The table was wobbly and a bit dated with the gray glass, so I took the glass out and tightened all of the bolts with a ratchet set. Then, I whisked myself off to Home Depot to buy some wood to replace the glass.

IMG_0434

I roped in this kind gentleman to help me cut the wood down to size since we don’t have a table saw (and 51″ is too long to cut even remotely straight with a circular saw). Twenty minutes later, I walked out with two new shelves and some scraps.

IMG_0435

I set up shop on our patio, sanding and staining the wood. I mixed a walnut brown with a light gray stain to lighten the brown color a lot. I ended up with a light brown with hints of gray in the knots of the wood. Two coats of stain, two coats of poly, one light sanding and voila!

Console After

Love love loveeee. It fits perfectly against the wall opposite our bay window where the couch used to sit.

Console In the room

It even matches the style of our coffee table (You can see the style better below when we used them as end tables).

End Table

I waited a day to let everything dry and cure completely before staging it.

Console2

I’m still working on that, but this is stuff I had all around the room just waiting for a home on a nice console table like this one.

Console3I just love having a spot to put out pictures and flowers 🙂

All in all, this project cost a little less than $70 — not too bad for a new console table, especially when it’s twin at Ballard goes for $350!

Next up, a mirror for right above the table, which is centered with our bay window. The mirror will bounce the natural light around the room and really anchor the table with the wall. Now I just gotta find one I like!

Hope you all had a great weekend! Between the console table (I did this whole project in one night after work last week), a BBQ and a river walk, my weekend was a blast.

RemRiv

Rem had a pretty good weekend, too.

Happy Monday!

Craft Projects

No-Sew Tablecloth

No-Sew Tablecloth

We needed a new tablecloth in the Smith household BIG TIME. I only have one tablecloth that I like, and therefore only one that I use. So I am always always always washing the darn thing. But I love it! Too bad no one sells any cute tablecloths anymore. Target let me down. Amazon let me down. WalMart let me down. Everything else is either way expensive (and still ugly) or some plain color (boring).

So my neighbor and I went fabric shopping and we found an awesome fabric that picks up the blues I love and the green in the kitchen. Perfecto!

No-Sew Tablecloth hem tape

We also found some SUPER hem tape that is able to be washed — totally necessary for a tablecloth.

Here are your directions to make your own tablecloth. Buy fabric. Buy hem tape. Iron a hem. Iron in hem tape. DONE!

Make sure you are hemming the nice part of the fabric onto the underneath of the fabric.

No-Sew Tablecloth iron

For real, it is that easy, although it does take about an hour. I got two yards of fabric that was 54″ wide — I didn’t trim any off for my rectangular tablecloth. Then, I started ironing a hem onto one edge. Don’t hate me for being the world’s best eyeballer, but I didn’t measure a single thing. I simply eyeballed all the way down the edge. It is freakishly straight.

No-Sew Tablecloth corner

The only tricky part about the tablecloth is the corner. Well, really all four of them. When you get to a corner, fold one edge over the other and cut at an angle. Put your hem tape and iron. Let it cool, then add more (if there are un-hemmed spots) and iron again.

Once your edges are all hemmed, iron the whole cloth and throw it onto your table!

No-Sew Tablecloth 1

Isn’t this fabric great?! I love how it pulls in the color of my kitchen.

No-Sew Tablecloth 2
Well, I bought four rolls of hem tape and only used one…. guess who is totally making another tablecloth…. if I can actually find another fabric I like. I am sooooo picky.

Have a great weekend!!!