Tag: tree

Christmas, Craft Projects, DIY GIFT GUIDE, Holiday, Quick and Easy Crafts

DIY GIFT GUIDE: Spool Ornament

Jessica Smith

Spool Ornament Cover

Today’s DIY GIFT GUIDE post is even easier than yesterday’s and would look super cute on your Christmas tree!

Know someone who sews? Then this would be the perfect gift for them! Turn an old wooden spool into a Christmas ornament in just a few steps.

Supplies:

  • Wooden spool
  • Wire
  • Ribbon
  • Beads
  • Wire Cutter
  • Scissors

Steps:

  • The worst part of this project is the first part. Remove any old thread from your spools so they are completely bare. I did the by unraveling each spool, but if you don’t have the patience (not sure how I did) you could score yours off with an exacto knife.

Spools

  • Once your spools are naked (hehe), cut a long pice of wire and fold it in half. Thread a seed bead onto the end and let it rest in the bend of the wire. This will stop your larger beads and spool from falling off of the wire.
  • Thread your beads onto the wire — thread through both ends of the wire.
  • Thread your wire through the spool, then add beads on top. I liked my ornament simple and just added one bright red bead below and above my spool. You can add as many as you’d like.
  • Create a loop in the wire after you add your last bead, then secure the wire by wrapping the long ends around the base of the loop until your wire runs out.
  • Tie a piece of ribbon through the loop to make a hook for the tree.
  • Embellish your spool with a large ribbon.
  • Ta da! Hang on your tree!

spool

If you want to get fancy, seal the ends of your ribbon with a no-fray fabric treatment. I haven’t done that to mine, but I probably will before I gift them.

spool ornamentCheck back tomorrow for another gift idea!

 

 

Christmas, Craft Projects, Holiday, Quick and Easy Crafts, Wine Crafts

Wine cork grape ornaments

Jessica Smith

I think this craft is one of my all-time favorites. My neighbor and I did a craft night before my Trash to treasure fair and we made so many cool things out of corks!

Unfortunately, I only have photos of the finished project. It’s hard to remember to take photos when you are crafting with one of your best friends. It’s basically non-stop talking mixed with singing along to Christmas music.

Anyway, check these out!IMG_0020

To make a wine cork grape ornament, you will need 8 wine-stained corks, a thin piece of cork, wire, hot glue, ribbon and a leaf!

First, you will need to cut the tops of your corks off. We used sharp knives from my kitchen to cut through the cork. Err, correction, Allie used the sharp knives… I couldn’t stand the noise it made. Either way, cut about half an inch from the wine stained end. We didn’t care if ours we all the same length because the different sizes gave the ornament a nice depth to it. (Can an ornament have depth?)

IMG_0021

Once the cork tops were sliced off, I arranged them on a flat piece of cork that Allie got from TJ Maxx. It’s super thin and was meant to be a placemat. It worked great for this project, but you could use really anything to glue the corks onto. Cardboard, maybe.

Once the corks were arranged in a grape shape, we traced around them and cut out the cork. Then, we glued the leaf at the top (from a fake flower) and proceeded to glue each grape onto the cork.

IMG_0022

When the glue dried, I poked wire through the cork and made a hidden loop behind the leaf. Then I strung my ribbon through the top and hung it on our holiday garland!

I absolutely love these ornaments and will definitely be gifting a few this holiday season.

 

Christmas, Craft Projects, Holiday, Wine Crafts

Wine Cork Rudoplhs

Jessica Smith

wine rudy2

OMG OMG OMG OMG. A CRAFT POST.  A CHRISTMAS CRAFT POST!!!!!

Holy smokes, she’s back! Yup, this craft blogger has some crafts to show you! I mentioned a few posts back that I have ben focusing lately on getting healthy and losing weight — well, I am more than 30 lbs down (Thank goodness! Chubby me was tired of being chubby!) and feel like I have a much better grasp on the balance between eating, exercising and all other fun activities like CRAFTS!

Enter Rudolph the wine cork reindeer!

To make this freakin’ adorable ornament, first start with a cork. I like the corks that aren’t true corks. They have a layer of skin (almost) to them that makes this project easier than if you were to use a true cork.

Cork Rudolph_1

Drill through the cork — don’t go top to bottom, rather drill through the side of the cork, somewhat near the top. This will be the heigh of your antlers.

Cork Rudolph_2

Cut a long piece of malleable brown wire and fold it in half. Stick the wire through your drilled hole, sending the folded end through the cork first. I learned the hard way that it is much more difficult to get your wire through your cork if the sharp end leads the way.

Cork Rudolph_3Your cork should sit in the middle of your wire.

Next, it’s time to form your antlers. I folded the wire about 1.5 inches from the base and twisted the wire until it touched the cork. Then, with the extra wire I wrapped back up the twisted portion and did this again. I ended up with three-pronged antlers, with the extra wire wrapping down along the base of each. Do this on both sides.

Cork Rudolph_4

Once the antlers were on, I screwed an eye hook into the top of the cork to make this an ornament.

Cork Rudolph_5Time for the eyes and nose!

Here’s where your cork having “skin” is important. I took a nail and pressed it through the skin of the cork as an appropriate eye level for rudolph. It went in at one point and came out another — these entry/exit points are where the wire will enter and exit.

Cork Rudolph_6

Once you create your hole and feed your wire through, add see beads for eyes. Get them as close to the cork as possible, then wrap wire around the base of each eye to secure them to the cork.

Cork Rudolph_7

One eye!

Cork Rudolph_8

Two eyes!

I used this exact same process for the nose. I tried to make the entry and exit points closer together when feeding the nail through the cork since the nose didn’t need no be spaced far apart like the eyes. I used beads and bells on different ornaments, but each one needs to be secured to the cork by wrapping the wire around the base.

Cork Rudolph_9

The final step is to add a ribbon! Voila! Rudolph the Red-Nosed Wine Cork!

CORKRUDY

Cork Rudy is hanging on my mini tree in my office. Yes, I’ve started decorating already 🙂

IMG_0033