Tag: votive

Craft Projects

Mod Podged Candle Holders

Jessica Smith

Today I’m sharing another project I made for the upcoming Trash to Treasure Fair in November. Using pages from an old book and the remainder of my burlap fabric scraps, I turned two shot glasses that my mother-in-law’s work was going to throw away (not sure why they have shot glasses…) into adorable candle holders.

Here’s what you’ll need:

  • Pages of a book (or any paper) cut into little pieces
  • Mod Podge
  • Fabric
  • Hot Glue
  • Needle and Thread
  • Buttons
  • Ribbon
  • Glass

To start this project, I cut up three or four pages from an old dictionary into little pieces of paper. I had no rhyme or reason for the shape of the paper, just random shapes.

Once my paper was small enough, I started to Mod Podge it to the glass. I put a thick layer of the podge down, then placed strips of paper on top. I smoothed out the paper as I went along to remove any bubbles between the paper and the glass. Once each glass was covered, I placed a layer of podge on top.

I let the candle holders dry for a bit before adding embellishments. They weren’t dry completely, but I didn’t mind since I wanted the stuff I was adding to stick right on top.

At this point, I flipped each glass upside down and added a slim, pink ribbon around the bottom with small dabs of hot glue.

With the pink ribbon added to each glass, I set both candle holders aside to create two oversized flowers. I cut out five petals for each flower, using scraps from an earlier project.

To connect the petals, I folded each petal at the flat edge in an accordion-style fold: down, up, down, up, down.

Then, I sewed through each of the folds. Once I had stitched my way through one petal, I went on to the next, adding petals until I was out.

When all five petals were connected, I looped the needle and thread back through the first petal to finish off the flower.

With the flower complete, I selected a flashy button to add to the middle. I added it to the flower with hot glue, then hot glued each flower to a candle holder.

OHMYGOSHSOCUTE. If these don’t get snatched up at the fair, I might not be so upset.

I like how large the flowers are on the glass, the pink ribbon “leaves,” and the randomness of the dictionary scraps. These might be my favorite candle yet. Now I just need to remake them with aqua ribbon instead of pink ;p

Craft Projects

Burlap Rosette Candles

Jessica Smith

I am excited to share that I’m participating in a craft fair in a little more than a month! On Nov. 10, I will be at the Watkins Nature Center partaking in their Fourth Annual Trash to Treasure Green Craft Fair! I’ve done this fair two times in the past, but missed it last year. I’m excited to go again — it’s the coolest fair I’ve ever been to and I am really looking forward to it.

Anyway, my new few weeks will be spent making crafts out of recycled goods, scraps, trash, etc. The goal is to repurpose things you might otherwise throw away into something neat and useful again.

For my first project, I made a set of candles using fabric scraps or burlap that were barely big enough for the task at hand. I also used old buttons and thrift store glasses. The only “new” supply I used was some pink ribbon.

My piece of fabric was about 9 inches by 7 inches, so just long enough to wrap around my candle. I cut out a strip and placed a dab of hot glue midway down the glass to secure one end of the fabric to the candle holder. Then, I placed Mod Podge beneath the fabric as I wrapped it around the glass. Once it was in place, I slathered on another layer of Mod Podge on top of the fabric.

I let this dry, then added a skinny pink ribbon through the middle of the fabric. For the ribbon, I secured it to the glass only with a few dabs or hot glue.

After the ribbon was on, I started to make a few rosettes out of the burlap fabric. (Note: It’s not actually burlap, but it looks close enough so that’s what I’m gonna call it.) To make the rosettes, I used skinny strips of fabric and Mod Podge.

To make the rosette, I twisted on end of the fabric in my fingers and added some Mod Podge. This is the center of the rosette.

I kept twisting the fabric, winding it around itself as I twisted and all the while adding Mod Podge. Once the fabric ran out, I was left with a cute rosette that I set aside to dry.

Fast forward: The glass is dry, the rosettes are dry — time to combine!

I pulled out my hot glue gun to add the rosettes to my candle holders, along with some buttons.

I glued two rosettes to one glass and on onto the other. Then, I added buttons in the center of each rose, and a few alongside each.

Ta daaaaa! Two candle holders made out of fabric scraps and buttons 🙂

What a cute pair!

Craft Projects, Thrift Store Finds

Bird Wall Sconce

Jessica Smith

Holy cow, this was an exhausting weekend. As you may know, our dishwasher has been broken for what seems like ages now. We finally got the go ahead from Samsung to return our dishwasher back to Best Buy, so we went there on Saturday to process a replacement. Turns out our dishwasher is already discontinued — guess everyone else thought it sucked, too — so we had to just return the dishwasher for a refund, wait for that to go through, and buy a new one. *sigh* As if that weren’t a hot enough mess, everything in our house seemed to leak this weekend… pipes, washing machine, sink, etc. Ahhhh the joys of being a homeowner. We are hoping to buy a new dishwasher tomorrow *fingers crossed*!!! I would love to fill the gaping hole underneath our cabinets with a working dishwasher and reattach the pipes underneath our sink. Can’t wait.

Luckily, that was the only bad/stressful part of our weekend. We went to a bonfire and I did lots of crafts. Lots!

On to the crafts!!!

I don’t even remember where I picked up these wall sconces, but they were in need of some l-o-v-e love.

I was originally going to spray paint them, but neglected to do so for real. So, I busted out some of my paint samples and got to painting. I went with a light teal and a light brown.

I took off the candle holder with a screwdriver, then painted the back of the sconce teal and the candle holder brown.

After several coats of each color, I painted the outer trim of the sconce a light brown, too.

Once everything was dry, I pulled out a stencil I’ve been wanting to try. This time, I used stencil adhesive. If you use a stencil, USE STENCIL ADHESIVE. It really does help keep the stencil in place while you paint.

I placed my stencil on the sconce exactly where I wanted it, dabbing on the adhesive around the cutouts right before.

Once the stencil was secure (I only waited about a minute after placing it on), I painted the tree brown, the leaves green and the bird blue.

I pulled off the stencil as soon as I was done painting. Once everything was dry, I screwed the candle holder back onto the sconce.

Now that’s an improvement, wouldn’t you say?

I love it!

I do have a confession, though. It wasn’t until I started writing this post that I remembered I have a second sconce somewhere around my house!! Should I make a second bird sconce since it turned out so well, or should I do something completely different?

I hope you all had a great weekend. And a special thanks to those of you who checked out my blog this past weekend — I had a record number of views on Saturday and was so very excited about it. You guys are awesome and I hope you keep coming back for more!