Craft Projects

Knockoff: DIY Herringbone Art

I stumbled upon a fabulous blog the other day that you all should DEFINITELY check out. Sarah at While They Snooze is incredibly talented and just recently competed in Creating with the Stars over at East Coast Creative. I was perusing her blog and saw the most magnificent artwork that I wanted so badly for our house. SO BADLY!!!

Here’s one of those times when beautiful things should be admired and not replicated. They never turn out how you want them to. Following her lovely tutorial for her DIY Metallic Herringbone Art, I created my less-than-adequate version of her masterpiece.

Instead of telling you what I did, you can scroll through the photos below of the steps I took. But what you should really do is go and check out Sarah’s art. Because it is amazing. And yeah, you have to click over. I don’t like borrowing photos. Trust me, it’s worth your time.

{A Smith of All Trades} Herringbone Art1

{A Smith of All Trades} Herringbone Art2

{A Smith of All Trades} Herringbone Art3

{A Smith of All Trades} Herringbone Art4

{A Smith of All Trades} Herringbone Art5

{A Smith of All Trades} Herringbone Art6

{A Smith of All Trades} Herringbone Art7

{A Smith of All Trades} Herringbone Art8

Now that you see my finished piece… what do you think? I wish I had had gold spray paint on hand. I just might try this one more time, even though it took a while. I just love her finished piece and have TOTAL art envy.

Craft Projects, Furniture

Over-sized Jar Lamp

IMG_0134

Happy one-year house anniversary to us! A year ago today we closed on our house — what an adventure it has been. Every room of our house has been painted, we did a massive family room overhaul, and tackled smaller projects here and there along the way.

My newest project is making our living room pretty, which started last weekend when we got rid of our old, grimy couch and purchased a pretty, new one!

Old Couch

If you are on vine or twitter, you can see the satisfying thud this ugly thing made when it hit the bottom of the dumpster at the local dump. So satisfying.

We didn’t mourn this couch long (or at all) — from the dump we headed to a local warehouse to pick up the clearance couch we’d purchased the night before. Not to brag too much, but we got our new couch for a steal!

AND IT IS ADORABLE!

IMG_0003

The pillows that came with the couch were a little too Hawaiian for me, so I picked up the charcoal gray and teal pillows at Target! I also got a gray throw and snagged the light gray pillow from our bedroom. It is so pretty. I love it.

Now that I actually have a couch I like and something to jump off of from a design standpoint, I am going non-stop to make this room perfect. See, this is my room. There is no TV and no computer, just a big window and a comfy couch. I want to be able to read in here! I can during the day, but at night I am in a fish bowl. That’s why I am working to find the perfect curtains for our bay window. I ordered some online, so fingers are crossed that they work.

In the meantime, I needed some more light in this room. With just the overhead ceiling fan, the light in this room is just mediocre come night-time. I have a beautiful glass lamp that I bought for super cheap at Target because it was broken. I fixed that and just need a flashy shade. I need a few more lamps though, so I decided to make my own.

Using a shade I had from the thrift store and an old, large jar, I set off today to make another light for that room.

IMG_0080

The first thing I needed to do was put a hole in the center of my jar lid. To do so, I had to find a drill bit large enough to fit my threaded pole (attached to the light fixture and to the nut underneath the lid). Once I found one, I carefully drilled through the lid while it was screwed onto the jar.

IMG_0084

Originally, I wanted to keep the green lid for my lamp, but no amount of scrubbing could remove the “crayon” label from childhood.

IMG_0081

Before I started to spray paint my lamp fixture, I figured out just how I was going to secure all of the parts of my lap. I ended up drilling through a mason jar lid with the same drill bit to use as extra support underneath the jar lid. I opted for a stack of washers on top of the lid to raise the light fixture up, and one washer and two nuts underneath for added stability.

IMG_0111

I also used a lamp harp to support the shade.

IMG_0112

Between the brassy harp, green lid and silver washers, I needed one finish for all of the parts of my lamp. I got out some metallic silver spray paint and lightly dusted all of the parts so they would match. I also did a coat of polyurethane.

photo (10)

When everything was dry, I assembled all of the pieces: Light socket & threaded rod > harp > washers > lid > mason jar lid > washer > two nuts. I tightened the heck out of everything, and when it was good and secure I placed the lid of the jar back onto the freshly washed and crayon-free jar.

I added the shade and the finial and put it next to the couch.

IMG_0135

What do you think? It turned out pretty darn cute if you ask me. Now I just need to replace that old piano bench with something a little classier since my couch is so pretty now!

IMG_0128

Did I mention I only paid $2 for the gorgeous shade?

Craft Projects

Marble Tray

Marble Tray

Months ago I was at my momma’s house and we stumbled upon a huge jar of marbles that used to be my step dad’s. I knew he loved the marbles, but I didn’t know why he was keeping them in the closet and not out somewhere in the house so people could see how cool they are. I asked if I could take them to make them into something cool, which is what I did for his Christmas gift.

Enter the Christmas tray from the thrift store. This bad boy was uglyyyyyy. So ugly. But, it was the perfect size to make a cool tray for John.

IMG_1313

I took the tray outside and spray painted it black.

IMG_1315

When it was all dry I filled the bottom of the tray with marbles and started to prepare the epoxy resin  to fill in the tray.

IMG_1320

For this tray I used Parks Super Glaze.

IMG_1318

To use the epoxy you mix equal parts of the hardener and the epoxy together. I like to mix mine in disposable cups so I can just toss them when I am finished. Mix everything together really well then pour it onto your project. It will level itself out, so just make sure you place it on a level surface.

IMG_1319

Here’s the tricky part — you have to let it sit in a dust-free zone for three whole days. Rough, I know. You also need to keep your project in a warm area. The epoxy will not cure if it dries in the cold. I learned this the hard way.

And because I learned it the hard way, there was one tricky spot on my tray I couldn’t get to cure. So I solved the problem by painting a label onto the tray in chalkboard paint so I could write “John’s marbles” on it. I accented with gold paint and the tray was complete.

My parents have an antique room in their house, so that’s where John put it after I gave it to him on Christmas.

IMG_2456

This project was long in the works, but I know my step dad really loved it.

I love using the epoxy and am definitely learning new stuff each time I use it. It is such a cool finish on projects and I will definitely be using it again in the future.

IMG_2458