Furniture

Metalic Pedestal Side Table

I’ve had this beautiful silver tray for more than a year now, holding onto it because I knew eventually I’d come up with something cool for it. Well, I finally was inspired to tackle the tray, turning it into a side table for my navy blue chair.

My coworker and I were rummaging through a local thrift store on our lunch break last week and I found (what Rachel called) a plant stand that would become the perfect base for my table.

IMG_3927

A whole $5 later and I took that puppy home and got to work. First, I had to remove the top of the plant stand. Whoever built this screwed the top in right through the top itself. It didn’t look so hot, but whatevs.

IMG_3928

Once the top was off, I wanted to cut the icky part of the base off of the top. It was covered in an adhesive and was rather gunky.

IMG_3929My hacksaw quickly did the trick.

Next up, drilling through my tray. I used a drill bit that was capable of drilling through metal to put a hole smack dab in the middle of my tray.

IMG_3930

Then using a screw, I secured the tray to the top. In theory, I’ll eventually get a nicer screw for the top that is even less noticeable, but the one I chose you can barely see, so it works for now.

Ta da!

IMG_3933

Except my hubby thought it was really ugly. And the more I looked at it, especially next to the chair, the more I thought it was sorta ugly, too

So then I decided to spray paint the base black. I did the best spray paint job of my life, which involved a TON of patience. A few coats later and a coat of primer and I was almost finished.

One last step — I cut a small circle of thin wood out to sit under the tray so it wouldn’t be flimsy. After painting this black, too, I secured the table back together.

{A Smith of All Trades} Metalic Pedestal Side Table4Much better, huh?

{A Smith of All Trades} Metalic Pedestal Side Table2

It’s the perfect size for a side table, although Brian still hates it so I might relocate this table into our downstairs bathroom to hold a few decorative knickknacks and some hand lotion.

{A Smith of All Trades} Metalic Pedestal Side Table

I think it’s pretty darn cute, though. And for under $10 — heck yes!

Craft Projects

Key and Crystal Wind Chime

As promised — new craft project!!!

Remember how I altered my aunt’s beautiful wind chime to match her preexisting one? That project inspired me to think out of the box to create her a final wind chime to complete her set. Both of her chimes are copper with key and crystal accents, and I happened to have a ton of old keys and chandelier crystals in my craft room. What luck!

{A Smith of All Trades} Old wind chime

{A Smith of All Trades} New wind chime

I set out to make my own wind chime using  keys, crystals, wire, chain and an embroidery hoop.

{A Smith of All Trades} Hoop unpainted

First, I separated my hoop into two pieces. I went outside and hit each side with some copper spray paint to match my aunt’s existing chimes.

{A Smith of All Trades} Hoops painted

Once the hoop was dry, I brought it inside and drilled six holes around the inner of the two hoops. This is where I attached the actual chimes, using the outer ring as a safety measure against the wire getting too much wear and tear.

{A Smith of All Trades} Hoop

When the holes were drilled, I started making each strand of the chime. I didn’t want my strands to be even, so I didn’t bother measuring out the chain. For this step, I laid out my supplies: pliers, wire, chain, keys, crystals.

{A Smith of All Trades} Tools

I had two sizes of crystals from a leftover chandelier: Large drops and small faceted octagons. I used the large drops at the end of each chain to give them weight. For keys, I had a nice mixture to choose from. I opted to not be matchy-matchy. I spray painted a few copper, but left others natural.

To get the crystals onto the chain, I took a copper wire and looped it through the pre-drilled hole.

{A Smith of All Trades} Wire

Once the wire was in and trimmed to a good length, I started to twist it around itself, creating a loop at the other end and hooking in the chain. Once the chain was hooked onto the wire, I came back down the wire, wrapping it around itself until the wire ran out.

{A Smith of All Trades}Wire Wrap

After the anchor crystals were on, I continued this process up the chain. Crystal, key, crystal, key. I added more keys to some chains, and fewer to others.

{A Smith of All Trades} Crystal bead

Once the chains were created, I attached them to the embroidery hoop using the same method of twisting the wire. When all six chains were added, I added two chains at the top (using the existing holes) to hang the chime from.

{A Smith of All Trades} Crystals

Aren’t the crystals beautiful?!

{A Smith of All Trades} Key

And I just love the different keys that I added to the chime. They are all so unique.

{A Smith of All Trades}Wind Chime cg

The chime is so pretty, I almost don’t want to send it off to my aunt. But it will match so nicely.

{A Smith of All Trades} Wine Chime1

{A Smith of All Trades} Wind Chime

{A Smith of All Trades} Wind Chime 2

What do you think? Will you be grabbing your space embroidery hoops and old chain to make a chime? You could make on using beads instead of crystals! Anything would go 🙂

Craft Projects

Umbrella shower light fixture

My coworker Rachel gets married a month from today, and yesterday we threw her a surprise bridal shower at work. I was in charge of gifts. I also had to make an umbrella light to tie in with the shower theme. My other coworker found the idea on Pinterest and showed us at a secret shower planning meeting. Another coworker even had the busted umbrella.

I’m embarrassed to admit that even though I’ve been blogging for more than a year now and totally know how this whole before and after thing works, I TOTALLY forgot to take a picture of just the light. I was too excited about the surprising.

Anyway, to make your own umbrella light, you need an umbrella. And lights.

IMG_3407

Carefully remove all of the fabric from your umbrella so it’s naked and rather dangerous-looking.

IMG_3408

Spray paint the heck out of your umbrella. I went with white because my lights had a white cord.

IMG_3409

Let your umbrella dry and touch up any spots that didn’t get adequate coverage. Be careful because those spokes can be dangerous!

Next, wrap your umbrella with lights however you please! You can see the light hanging from the ceiling in the upper right corner of the photo.

IMG_3411

And again, in the middle of the photo.

IMG_3412

I think it would look even cuter in a rustic sort of setting and not a stuff conference room.

Rachel loves chocolate, so we had a ton of chocolate goodies: Fondue, brownies, mousse…. we even had Dana (Little King’s Confections) make a chocolate cake with strawberry filling. How pretty?!

Cake

Rachel was DEFINITELY surprised — especially since she thought she was wayyyyy late for a staff meeting.

Surprise

Rookie move not getting a picture of the light by itself, but here’s another photo of the light, the cake and the bride-to-be.

UmbrellaCongrats, Rachel! Glad we were able to totally surprise you 🙂