Tag: hot glue

Craft Projects

DIY Button Tray

Jessica Smith


IMG_0160

Need a fun project for the upcoming weekend? Why not try making your own button tray?!

This tray takes a while, but the end result is totally worth it.

Supplies:

Step one: Prepare your tray for painting by doing a light sanding (if necessary).

Plain tray

Step two: Apply several coats of paint to your tray, allowing adequate dry time in between coats. I opted for an off-white color for my tray.

Step three: Once your tray is dry, start securing buttons to the bottom using glue. I used super glue until I ran out of it and switched to hot glue. Glue your buttons as close to one another as possible. Do not skip the gluing step because the buttons will rise when you pour on your super glaze.

Button Tray

Button TrayStep four: When all of your buttons are secure and the entire tray is filled, it is time for your super glaze. I buy mine from Home Depot. Mix up your super glaze according to the directions pon the box (1:1), then pour over the buttons. To get the best results, I poured my first layer and let it dry for the recommended 72 hours. Then I came back and poured a second layer to fill in any nook, crannies and buttonholes.

Step five: This is the hardest part — let your tray dry for the full 72 hours. I had to wait twice since I did mine in two layers! If you don’t, you will get fingerprints on the clear finish and it might be tacky. Also, let the tray dry in the warmest room in your house. I let mine dry in our office — the hubby’s computer makes it super warm. When I let it dry in our cool basement, the finish on the super glaze was tacky to the touch. Always place cardboard underneath in case anything leaks out (which is did because my tray cost $.50 and wasn’t the greatest work of construction known to man).

IMG_0151

Step six: Admire your hard wok and patience by displaying your beautiful tray proudly in your home.

IMG_0152

Button Tray square

 

Craft Projects, Dollar Store Crafts, Holiday, Valentine's Day

Hot Pink Valentine’s Day Boa Tree

Jessica Smith

Valentines Day Boa Tree

Need an inexpensive, cute Valentine’s Day decoration for the upcoming holiday? Why not make a Valentine’s Day tree!?

OK, I know trees are usually just for Christmas, but just follow along with this one because the end result is pretty darn cute.

Supplies:

  • 1-2 boas from the dollar store
  • 1 cereal box
  • Hot glue
  • Tape
  • Embellishments (ribbon, chain, etc.)

Step 1: Cut your cereal box down to one panel.

Valentines Day tree - box

Step 2: Fold your cereal box panel into a cone shape and tape the heck out of it so it keeps the shape. This becomes the base for your tree. You can’t see the tape through the boa, so feel free to use however much you need.

Valentines Day tree - cone

Step 3: Trim the edge of the cone to be flat. You will have a lot of excess from the cereal box, so it is OK to cut a lot off. Cut it to the size that you would like your tree. I only had one boa, so I made a small tree. If you have additional boas, your tree can be taller.

Step 4: Starting at the top of your tree, hot glue your boa to the cardboard. Boas usually have small finger holes at each end that are made of rope. I put this little ring around the top of the tree and glued that on first.

Valentines Day tree - glue

Step 5: Start winding down the tree with hot glue and boa. When you get to the bottom, cut a small slit into the bottom of the cardboard base and place the other knotted finger loop in the slot. Hot glue it in place to secure the boa on the tree.

Valentines Day tree - boa

Step 6: I stuffed the base of my cone so it was a little sturdier. To do so, I spiraled hot glue in the cone and put two crumpled up paper towels in the cone.

Step 7: Embellish. I added a silver chain, black ribbon and a black bow to my tree.

Valentines Day tree - bow

Step 8: Display in your house for everyone to see. Mine’s on our mantel right now and I love it. It looks half tree, half little pink monster hiding behind our wedding photos.

Valentines Day tree - mantel

Come Christmas time next year, I want to make several of these trees using white boas. I’ll probably make them in varying heights. How pretty would that be?

Happy friday and have a great weekend! Got any good plans for the holiday weekend? It’ll be visiting with family and lots of football at our house.

 

Christmas, Craft Projects, Holiday

Christmas Tree craft

Jessica Smith

IMG_2480

I got the best Christmas present ever when my dad called me on Dec. 23 to ask if I wanted to do a Christmas craft on Christmas Eve morning before all of our festivities began. I said yes (duh) and dad went out hunting for supplies. When he was younger, his mom made Christmas trees out of mixed nuts that she decorated and hung on a wall in their home. He wanted to make one just like it for his home and for mine.

For this project we used:

  • Thin sheets of wood
  • Hot glue
  • Nuts in their shells (three or four bags)
  • Pinecones
  • Metallic spray paint
  • Small ornaments
  • Fabric
  • Batting
  • Drill
  • Jigsaw
  • Wire
  • Felt

Step 1: Bake pinecones to kill any critters that may be living inside. Bake for 25 minutes at 200 degrees. That should do the trick. We gathered ours outside of our gym at 6:30 a.m. … in the dark. I’m sure we looked wayyy creepy.

Step 2: Sketch out a tree shape onto a piece of wood. We drew a triangle for the tree, a small rectangle for the stump and a trapezoid for the base.

Step 3: Cut out your tree using a jigsaw (or a hand saw if you prefer).

IMG_2394

Step 4: If you want to make more than one, use your cutout tree as a stencil and trace it onto the first sheet of wood.

Tree stencil

Step 5: Drill a hole in the top of the tree and string wire through to make it easy to hang later on.

IMG_2398

Step 6: Start gluing on your nuts and pinecones. I used a pine cone for the top of my tree. Dad used a prickly seed from a sweet gum tree as his topper.

IMG_2399

It is OK to have gaps in your nuts and pine cones because you’ll be filling it in with ornaments later on.

IMG_2402

Step 7: Spray paint the top of the tree using a metallic spray paint of your choice. Dad went with a bronze metallic.

IMG_2401

I chose a metallic silver for mine.

IMG_2403

Step 8: Once your tree is painted, it is time to create the trunk. I clipped edged of pinecones and glued them onto the trunk.

IMG_2404

Dad went with thin twigs. If you’d like your trunk to be the same color as your tree, do this step right after gluing on your nuts.

IMG_2405

Step 9: Glue your ornaments onto the tree.

Step 10: Cover the base of the tree in batting. Then, cover with fabric. Our wood wasn’t thick enough for staples, so we hot glued all of our fabric and batting directly to the wood.

IMG_2408

IMG_2407

Step 11: If you see the need, which we did, glue felt to the back of your tree (small circles will do) to spots of the tree that might rub against the door or wall you will hang it on. You don’t want to scuff your walls, and small circles of felt in the corners and around the wire will help.

Step 12: You are done! Hang your tree up for the holiday season and admire.

This was definitely best part of my holiday break, which is saying a lot because I had an amazing holiday break. I loved doing such a fun and sentimental project with my dad. We have one more base for next year. Dad’s got grand plans for how to make our next trees even better.

meanddad

Thanks for the great idea, Dad 🙂 Love you.

IMG_2479

One last thing…. happy birthday to my awesome mother-in-law, Robin!